Underground Gate Automation fully fitted to existing gates

Before work is carried out legally we have to carry out a detailed risk assessment, point loading calculations and execute a full site survey.

PLEASE NOTE THE PRICE DOES NOT INCLUDE INSTALLING POWER FROM HOUSE TO ENTRANCE. 

Supply and install the following gate system; 

• 2 x 24v underground gate motors- Nice L-Fab 24v 
• 2 x manual release mechanisms
• 2 x safety sensors 
• 1 x PCB in a waterproof enclosure
• 2 x remote controls
• Concrete x 7 bags
• Ballast x 1 tonne 
• Gate stops
• Ducting, cable cleats, ties.
• Commercial grade direct burial cabling, armoured cable, IP rated junction boxes, drainage, ducting* price excludes power to gate from house price subject to site survey 
• Clips, bolts, fixings, junction boxes, glands. 
• Resin, Silicon, Grease
• Disposable items such as welding rods, cutting discs and diamond blades.
• Fuel to/from site
• Allowance in cost for warranty return visits
• Delivery charges.
• All groundworks
• Making good of driveway areas directly affected by our work 
• Install, test, commissioning of automation and access control equipment.
• 2 YEAR WARRANTY 

Once the installation has been completed, we then carry out extensive testing, we have to force test the gates and complete a technical file, CE Mark the gates and provide a 2-year warranty. 

Method of entry/exit- remote control only- intercom and exit loops are priced separately 

• Foundation boxes with mechanical stop on opening in stainless steel (BMBOX4I), ideal for use in extreme conditions with cataphoresis paint finish (BMBOX4), highly resistant to corrosion.
• Maximum freedom of choice: release from inside or outside, two key or lever operated models, freely combinable and easy to operate with just one hand.
• Simple installation: built-in mechanical stop system on closure.
• Standard opening to 110; or optional 360;
• Ideal for intensive use, BM4024 model is compatible with the control unit Moonclever MC824H, with BlueBUS technology, Solemyo and Opera systems:
• Simple programming via a single key;
• Self-learning of travel limits on opening and closing;
• Self-diagnostics of faults;
• Programming of pause time;
• pass door;
• Deceleration on opening and closing;
• Dual technology obstacle detection;
• Operation in the event of a power failure with optional rechargeable batteries (PS324);
• Provision for connection of latest generation sensitive edges.
• BM4000 model is compatible with the control units A6F and A60

Please note if you have existing gate automation that is to be replaced-  we charge an additional £250 for decommissioning and disposal of the old system, cabling and ancillary parts. This is due to additional man-hours on site and the cost of safe disposal of equipment. 

Disposal of waste from the site (skip on site if required) not included.